devices, or otherwise affected. This adaptation takes place automatically and immediately as needed.
1.2.2 BreadCrumb Mesh Connections
In order for two BreadCrumbs to establish a mesh link to each other, both BreadCrumbs must be set to
the same radio channel and have the same Network ID. The Network ID is computed from:
Network Name (simply a configurable name for the network; default value is “Rajant Mesh Network”)
Network Key (passphrase or key used to establish mesh connections and obfuscate unencrypted
network management traffic)
Packet cipher setting
MAC cipher setting
Per-hop verification setting
Key Sequence Number (default value is 0)
To modify these BreadCrumb configuration settings, a BC|Commander user must be logged in to the
BreadCrumbs with the User role co (Crypto Officer) and the corresponding password.
To Next Page
Loading...
Need help?
General
