Documentation Center
RAK3172 Module Quick Start Guide
This guide covers the following topics:
RAK3172 as a Stand-Alone Device Using RUI3
RAK3172 as a LoRa/LoRaWAN Modem via AT Command
Connecting to The Things Network (TTN)
Connecting with Chirpstack
LoRa P2P Mode
Prerequisites
What Do You Need?
Before going through the steps in the installation guide of the RAK3172 WisDuo LPWAN Module, make sure to
prepare the necessary items listed below:
Hardware
RAK3172 WisDuo LPWAN Module
Computer
USB to UART TTL adapter
Software
Download and install the Arduino IDE .
⚠
WARNING
If you are using Windows 10.
Do NOT install the Arduino IDE from the Microsoft App Store. Instead, install the original Arduino IDE from
the Arduino official website. The Arduino app from the Microsoft App Store has problems using third-party
Board Support Packages.
Add RAK3172 as a supported board in Arduino IDE by updating Board Manager URLs in Preferences settings
of Arduino IDE with the JSON URL below.
After that, you can then add RAKwireless RUI STM32 Boards via Arduino board manager.
RAK Serial Port Tool
List of Acronyms
To Next Page
Need help?
General
