To Next PageTo Next Page
Need help?Do you have a question about the Rally RE12T38 and is the answer not in the manual?
Learn how to operate the machine safely and understand its controls.
Prepare the machine and area before operation, including safety checks.
Safe operation practices, including slope, traffic, and attachment usage.
Maintain and store the machine properly to ensure safety and longevity.
Assemble the steering wheel and its components onto the tractor.
Install the steering wheel extension shaft securely.
Install and adjust the tractor seat for proper operator positioning.
Ensure the safety switch cable is correctly connected to the seat holder.
Install the tractor battery, following safety precautions and connection instructions.
Identify and understand the location and function of all machine controls.
Operate the light switch for illumination.
Adjust engine speed and choke for cold and warm engine starting.
Operate the brake and clutch pedal for stopping and disengaging the engine.
Shift gears for forward, neutral, and reverse operation.
Connect and disconnect the cutting unit using the lever.
Adjust the cutting unit height for transport or terrain clearance.
Operate the ignition lock to start, run, and stop the engine.
Engage and disengage the parking brake for securing the machine.
Refuel the engine with unleaded petrol outdoors, following safety precautions.
Check the engine oil level regularly and add SAE 30 or 5W-30 oil as needed.
Maintain correct tire pressure for optimal performance and safety.
Start the motor safely by following the correct procedure.
Adjust throttle and choke for cold and warm engine starting.
Drive the tractor safely by following proper procedures for cutting and terrain.
Tips for achieving the best cutting results, including clearing obstacles and cutting techniques.
Operate the tractor safely on slopes, avoiding tipping and loss of control.
Turn in the correct direction to manage cut grass and avoid damage.
Safely stop the engine and disengage the cutting unit and ignition.
Perform regular checks before each use and follow safety precautions.
Access engine components by opening and removing the engine hood.
Perform periodic maintenance to keep the tractor in good running condition.
Service the engine and drain oil following manual instructions.
Log maintenance activities and dates to track service history.
Keep mower blades sharp, remove and maintain them properly.
Adjust the brake system for proper stopping performance.
Step-by-step instructions for safely removing the cutting unit from the tractor.
Reassemble the cutting unit by following the reverse order of dismantling.
Replace the drive belt for the cutting unit, ensuring correct installation.
Adjust the cutting unit height for optimal cutting results and level operation.
Adjust the cutting unit side-to-side to ensure a level cut across the terrain.
Diagnose and resolve common engine and starter motor issues.
Troubleshoot engine performance problems like uneven running, weakness, or overheating.
Diagnose and fix issues with the battery charging and lighting systems.
Address causes of machine vibration and uneven grass cutting.
Follow these steps to properly prepare the machine for storage at the end of the season.
Information on ordering spare parts, warranty service, and authorized dealers.
General| Brand | Rally |
|---|---|
| Model | RE12T38 |
| Category | Lawn Mower |
| Language | English |
