RAM 5500 - Page 57

3. Push and release the RIGHT arrow button to access
the ”Oil Life” screen.
4. Push and release the DOWN arrow button to select
“Reset,” then press and release the Right arrow button
to select reset of the Oil Life to 100%.
5. Push and release the Up arrow button to exit the EVIC
screen.
Vehicles Not Equipped With Passive Entry
1. Without pushing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Push and release the LEFT arrow then press and
release the DOWN arrow button to scroll downward
through the main menu to “Vehicle Info.”
3. Push and release the RIGHT arrow button to access
the “Vehicle Info” screen then scroll UP or DOWN to
select “Oil Life.”
4. Push and hold the RIGHT arrow button to select
“Reset,” then select “NO” or “YES” by pressing the
RIGHT arrow then press the RIGHT arrow button to
select reset of the Oil Life to 100%.
5. Push and release the Up arrow button to exit the EVIC
screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the Fuel Filter indicator system did not
reset. If necessary, repeat this procedure.
3
UNDERSTANDING YOUR INSTRUMENT PANEL 55