You must enter the security (shown on the ⬙warranty
card⬙, for example, 4359) code as follows:
Action Display
When you turn the radio on, the dis-
play shows ⬙0000⬙.
0000
Push the number 1 preset button un-
til the first digit of the code number
is displayed.
4---
Push the number 2 preset button un-
til the second digit of the code num-
ber is displayed.
40--
Push the number 3 preset button un-
til the third digit of the code number
is displayed.
43--
Push the number 4 preset button un-
til the fourth digit of the code num-
ber is displayed.
430-
Action Display
When you finish entering the code,
push the POWER button to accept
the code entered.
4359
If you enter the correct code, the radio will start as
normal in radio mode (TUNER). If you enter the wrong
code, the radio will remain locked until disconnected
from the power supply.
If the car radio power supply is disconnected for approxi-
mately eight seconds or longer, you will again be asked
for the security code when it is reconnected.
152 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
