NOTE:
Do not install the wheel cover on the spare tire.
7. Lower the vehicle by turning the jack screw to the left.
8. Refer to “Torque Specifications” in the Owner’s Manual on DVD for proper wheel
lug bolt torque.
9. Lower the jack to its fully-closed position.
10. Stow the damaged wheel/spare tire with the cable and wheel spacer before
driving the vehicle.
11. Install the winch extension and rotate the wrench handle clockwise until the winch
mechanism indication window turns yellow and the operator hears “3 clicks” from
the device to show the wheel is properly stowed under the vehicle.
Winch Mechanism Properly Engaged
(Yellow DOT Will Appear In The Winch
Indication Window)
Winch Mechanism NOT Properly Engaged
(Black Window Will Appear)
WHAT TO DO IN EMERGENCIES
122
To Next Page
Loading...
