The seat belts in the passenger seating positions are equipped with a Switchable
Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the
seat belt tight around the child restraint so that it is not necessary to use a locking
clip. The ALR retractor can be “switched” into a locked mode by pulling all of the
webbing out of the retractor and then letting the webbing retract back into the
retractor. If it is locked, the ALR will make a clicking noise while the webbing is
pulled back into the retractor. Refer to the “Automatic Locking Mode” description
under “Occupant Restraints” for additional information on ALR.
Front Bucket Seat Automatic Locking
Retractor (ALR) Location
Front Bench Seat Automatic Locking
Retractor (ALR) Locations
GETTING STARTED
32
To Next Page
Loading...
