Ramsond R74GW3 - Installation Verification and Maintenance; Unit Installation Correctness and Noise; Inspection and Maintenance

9
INSTALLATION & REPAIR GUIDE
Split Wall-Mounted air conditioner
* Is the unit installed correctly? *
* Isn't there anything which prevents ventilation or obstructs operation in front of the indoor unit ?
Do not install the unit following place .
* Inflammable gases may leak .
* Oil splashes a lot .
* In case where the unit is used in such places as poisonous or sultry gases are generated or seaside
district exposed to sea breezes corrosion may cause malfunction . Consult with your distributor .
* Air conditioner body and remote controller must be I m(39-3/4") or more away from a TV or a radio.
Drain the dehumidified water from the indoor unit to a place which drains well .
* When installing the unit , choose a place which can stand the weight of the unit well and does
not increase the operation noise or vibration . Especially where there is a possibility that vibration
be transmitted to the house , fix the unit by inserting attached vibration -proof pads between the
unit and fittings .
* According to the service conditions and operating environment , the inside of the air conditioner
will become dirty after several seasons (3 to 5years ) of service , resulting in decreased operating
performance .Inspection and maintenance are recommended in addition to usual cleaning (The
air conditioner can be used for a longer period and without anxiety .)
* As to inspection and maintenance , consult your dealer or any one of business offices of
dealing companies .(Service charge is required in this case .)
* We recommend to perform inspection and maintenance during an off seasons.
* Suitable Installation Position
* Pay attention to operation noise
* Choose the place where hot air and operation noise from the outlet of the outdoor unit do not
annoy the neighborhood .
* Things left near the outlet and inlet of the outdoor unit cause malfunction or increased
operation noise . Do not leave obstacles near the outlet and inlet .
* If irregular sound is heard during operation , consult with your distributor .
* Inspection and Maintenance