Need help?Do you have a question about the RAMVAC Bison 7 and is the answer not in the manual?
Essential warning about connecting equipment only to a supply mains with protective earth.
Mandates that an electrician must provide a means to isolate the circuit electrically from the supply mains.
Details electrical specifications including HP, voltage, amperage, and wire size for 60 Hz models.
Details electrical specifications including HP, voltage, amperage, and wire size for 50 Hz models.
Details system status for faults like "Maintenance Due", "Moisture in Filtrols", and "Low Oil", with corrective actions.
Outlines routine maintenance tasks and their recommended frequency (weekly, daily, hourly, and 2000-hour intervals).
Detailed steps for draining oil, checking the filter, adding new oil, and resetting the maintenance indicator.
Step-by-step guide on what to do when a "Moisture in Filtrols" fault occurs, including clearing the fault.
General| Type | Dry Vacuum System |
|---|---|
| Model | Bison 7 |
| Manufacturer | RAMVAC |
| Phase | 1 |
| Voltage | 208-230 V |
| Number of users | 7 |
| Voltage (V) | 208-230 V |
| Noise Level (dB) | 72 dB |
| Dimensions (inches) | 24" x 18" x 24" |
| Stages | Single Stage |
| Water Consumption | N/A (Dry Vacuum) |
To Next Page
