EasyManua.ls Logo

RAMVAC CustomAir 1000 Series - User Manual

RAMVAC CustomAir 1000 Series
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CustomAir by RAMVAC compressors offer superior air quality, quiet operation,
minimal space requirements and compressor heads that can be isolated for service.
CustomAir compressor heads are 100% duty cycle rated allowing them to run
continuously if needed.
Dual column desiccant dryer provides 100% continuous supply of moisture free air.
Our solid state electronic controller utilizes state-of-the-art circuitry and monitors
system functions which allows for multiple compressors to be operated
simultaneously in larger clinics.
CustomAir compressors are designed using trouble-free solid state transducers, in
lieu of mechanical pressure switches, to ensure dependability and long-life.
Like RAMVAC's dependable vacuum systems, CustomAir compressors utilize Baldor
motors for years of service.
CustomAir by RAMVAC Compressors have the best warranty in the industry -
6 years/4200 hours!
UL60601 Listed, NFPA 99c Compliant
For any practice looking for less
time servicing their compressor,
CustomAir® by RAMVAC®
is the number one choice.
M A K E S Y O U R P R A C T I C E P E R F E C T ®
CustomAir® by RAMVAC® Compressors
www.DentalEZ.com
http://Blog.DentalEZ.com

Questions and Answers

  • K
    Kevin TranAug 12, 2025
    Why RAMVAC Dental equipment compressor runs but pressure does not increase?
    • V
      Victoria RochaAug 12, 2025
      If your RAMVAC Dental equipment compressor runs but the pressure isn't increasing, consider the following: * Leaks in compressor fittings: See “Test Compressor for Leaks”. * Leaks in facility air lines: Test facility air lines for leaks. * Dirty intake filters: Replace the intake filters.
  • S
    Stephanie GarciaAug 18, 2025
    Why does my RAMVAC CustomAir 1000 Dental equipment compressor start and shut off more frequently than normal?
    • F
      felicia71Aug 18, 2025
      If your RAMVAC Dental equipment compressor starts and shuts off more frequently than normal, consider the following causes: * Condensate in tank: Contact RAMVAC®. * Leaks in compressor fittings: See “Test Compressor for Leaks”. * Leaks in facility air lines: Test facility air lines for leaks.
  • F
    fishermaryAug 27, 2025
    Why does RAMVAC CustomAir 1000 compressor run when pressure is not being used?
    • L
      Luis FaulknerAug 27, 2025
      If your RAMVAC Dental equipment compressor is running when pressure is not being used, there might be: * Leaks in compressor fittings: See “Test Compressor for Leaks”. * Leaks in facility air lines: Test facility air lines for leaks.
  • R
    Robert JohnsSep 3, 2025
    How to cool down a RAMVAC CustomAir 1000 Dental equipment compressor that gets too hot?
    • R
      Randy JenkinsSep 3, 2025
      If your RAMVAC Dental equipment compressor gets too hot, here are a couple of things to check: 1. **Ambient Temperature**: Ensure the ambient temperature is not exceeding 40ºC/ 104ºF. Lower the ambient temperature if it is too high. 2. **Compressor Operation**: Refer to the troubleshooting steps for “Compressor runs but pressure does not increase.”, as the compressor might not be shutting off properly.

RAMVAC CustomAir 1000 Series Specifications

General IconGeneral
CategoryDental equipment
TypeDental vacuum system
ModelCustomAir 1000 Series
Voltage115V or 230V
Horsepower1 HP

Related product manuals