EasyManua.ls Logo

R&S FSH3 - R&SFSH - options and applications

R&S FSH3
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Handheld Spectrum Analyzer ¸FSH4
Application
TDMA power measurements
Channel-power measurements
Field-strength measurements/
measurements with isotropic antenna
Power measurements up to 8 GHz/18 GHz
Directional power measurements up to 1 GHz/4 GHz
Measurements on cables (distance-to-fault)
Scalar transmission measurements
Vector transmission measurements
2)
Scalar reflection measurements
Vector reflection measurements
2)
Remote control via RS-232-C
interface
Product
1)
For ¸FSH 3 model .23 with serial number 103500 or later.
2)
¸FSH-K2 required.

¸FSH standard function
Not available
The ¸FSH is available as a 3 GHz or 6 GHz model either with or without an internal tracking
generator. When the tracking generator is included, the ¸FSH can be used for distance-to-fault
(DTF) measurements, scalar and vector network analysis, and one-port cable loss measurement.
Almost all models come standard with an adjustable preamplifier, making them suitable for measur-
ing very small signals. Power sensors are available as accessories for high-precision terminating
power measurements up to 8 GHz or 18 GHz as well as for directional power measurements up to
4 GHz. The following tables show possible configurations for various applications and an overview
of available models.
¸FSH options and applications
Receiver mode
One-port cable loss
measurements
¸FSH (models .03/.06)
with preamplifier
¸FSH (model .13)
with tracking generator
¸FSH (models .23/.26)
with tracking generator and
preamplifier
¸FSH models
Frequency range Tracking generator Output power of
tracking generator
Preamplifier Resolution bandwidth
¸FSH3 model .03
100 kHz to 3 GHz
100 Hz to 1 MHz
¸FSH3 model .13
100 kHz to 3 GHz
–20 dBm 1 kHz to 1 MHz
¸FSH3 model .23
100 kHz to 3 GHz
–20 dBm/0 dBm selectable
100 Hz to 1 MHz
¸FSH6 model .06
100 kHz to 6 GHz
100 Hz to 1 MHz
¸FSH6 model .26
100 kHz to 6 GHz
–10 dBm (f < 3 GHz)
–20 dBm (f > 3 GHz)
100 Hz to 1 MHz
C/N measurements
Channel tables
Code domain power measurements
on 3GPP base stations
1)
FSH-Z1/
-Z18
FSH-Z14/-
Z44
FSH-Z1/
-Z18
FSH-Z2/Z3
FSH-B1
FSH-Z2/Z3
FSH-B1
FSH-Z14/-
Z44
FSH-Z1/
-Z18
FSH-Z14/-
Z44
FSH-Z2
FSH-Z2/Z3
FSH-K3
FSH-K3
FSH-K3
FSH-K1
FSH-K1
FSH-K1
FSH-Z2/Z3
FSH-K2
FSH-Z2/Z3
FSH-K2
FSH-K4

Related product manuals