Need help?Do you have a question about the R&S FSH series and is the answer not in the manual?
General| Input Impedance | 50 Ω |
|---|---|
| Display | 640 x 480 pixels |
| Tracking generator | Optional |
| Interfaces | USB, LAN |
| Third Order Intercept (TOI) | +15 dBm typical |
| Input VSWR | ≤1.5:1 (typical) |
| Input Connector | N (f) |
| Power Supply | 100 V to 240 V |
| Frequency range | 9 kHz to 3.6/8/13.6/20 GHz |
| Battery life | Approx. 4 hours (standard battery) |
General warnings and guidelines for safe product operation.
Explanation of safety symbols, labels, and warning tags used in the manual.
Covers front view, unpacking, setup, powering on, and battery charging.
Details on instrument connectors and initial hardware, screen, audio, and regional settings.
How to control the RF attenuator and use the preamplifier for improved sensitivity.
Perform CW signal level, frequency, and harmonic measurements.
Perform power, return loss, and transfer function measurements with sensors.
Measure cable faults, save/recall results, and display GPS information.
To Next Page
