R&S FSH series User Manual

55
E-02
2.4.2 Reset to Factory Settings
RESET TO FACTORY SETTINGS set the R&S FSH to
factory defaults. All settings in the different menus
are set to the original factory settings and all saved
datasets, user defi ned transducer factors, limit
lines, standards, channel tables and cable models
will be deleted. Only the factory default fi les will be
re-installed.
Risk of data loss
All saved datasets will be lost.
 Press the SETUP key.
 Press the INSTRUMENT SETUP softkey.
The R&S FSH opens a list of general settings.
 Select RESET TO FACTORY SETTINGS with the
rotary knob or the cursor keys (∧ or ∨).
 Confi rm with ENTER.
A warning is shown.
Pressing YES will perform the reset. Pressing
NO discards this action. If YES is pressed, an
information window is shown during the device
rebooting.
GalaxyE_v1-10_3.indd 55GalaxyE_v1-10_3.indd 55 08.04.2009 15:21:4408.04.2009 15:21:44

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)