R&S FSH series User Manual

45
E-02
2.2.6 Hardware Settings
Set the R&S FSH to detect connected accessory
automatically.
Setting the auto accessory detection
 Press the SETUP key.
 Press the INSTRUMENT SETUP softkey.
The R&S FSH opens a list of general settings.
Select AUTO ACCESSORY DETECTION below the
heading HARDWARE with the rotary knob or the
cursor keys (∧ or ∨).
 Confi rm with ENTER.
A submenu opens in which the automatic
detection of accessories is set ON or OFF.
 Confi rm with ENTER.
If the connected accessory is detected the
item is displayed in the fi eld DETECTED
ACCESSORY below the heading
HARDWARE.
GalaxyE_v1-10_3.indd 45GalaxyE_v1-10_3.indd 45 08.04.2009 15:21:4308.04.2009 15:21:43

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)