3
E-02
Make sure to read through and observe the
following safety instructions!
All plants and locations of the Rohde & Schwarz
group of companies make every effort to keep the
safety standard of our products up to date and to
offer our customers the highest possible degree of
safety. Our products and the auxiliary equipment
required for them are designed and tested in
accordance with the relevant safety standards.
Compliance with these standards is continuously
monitored by our quality assurance system.
The product described here has been designed
and tested in accordance with the EC Certifi cate
of Conformity and has left the manufacturer’s
plant in a condition fully complying with safety
standards. To maintain this condition and to
ensure safe operation, observe all instructions
and warnings provided in this manual. If you have
any questions regarding these safety instructions,
the Rohde & Schwarz group of companies will be
happy to answer them.
Furthermore, it is your responsibility to use the
product in an appropriate manner. This product is
designed for use solely in industrial and laboratory
environments or, if expressly permitted, also in the
fi eld and must not be used in any way that may
cause personal injury or property damage. You are
responsible if the product is used for an intention
other than its designated purpose or in disregard of
the manufacturer’s instructions. The manufacturer
shall assume no responsibility for such use of the
product.The product is used for its designated
purpose if it is used in accordance with its product
documentation and within its performance limits
(see data sheet, documentation, the following
Safety Instructions
GalaxyE_v1-10_3.indd 3GalaxyE_v1-10_3.indd 3 08.04.2009 15:21:3608.04.2009 15:21:36
To Next Page
Loading...
Need help?
General
