R&S FSH series User Manual

36
PD 1309.6269.62-02
For rapid charging, be sure to switch off the
R&S FSH during charging. If the R&S FSH is
switched on, the charging current is reduced by
the power drain of the instrument. Battery charging
therefore takes longer.
The charging times are shown below:
Battery type: R&S HA-Z204 (supplied)
Charging time (R&S FSH switched off):
approx. 2.5 h
Charging time (R&S FSH switched on):
approx. 3.5 h
Battery type: R&S HA-Z206 (available as an
accessory)
Charging time (R&S FSH switched off):
approx. 3.5 h
Charging time (R&S FSH switched on):
approx. 4.5 h
To lengthen the operating time with one battery
charge, the R&S FSH has an automatic cut-off
circuit for the display background lighting after
a selectable time (0 to 99 minutes) after the last
input. The cut-off is deactivated in the default
setting.
GalaxyE_v1-10_3.indd 36GalaxyE_v1-10_3.indd 36 08.04.2009 15:21:4108.04.2009 15:21:41

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)