EasyManuals Logo

R&S FSH series User Manual

R&S FSH series
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
35
E-02
The battery’s charge status is shown at the top
right of the screen (see fi gure below). If the battery
is fully charged, the battery icon is fi lled white.
As the battery discharges, the white coloring
disappears in four steps until just the battery
outline indicates that the battery is fl at.
Battery charge state (1)Fig.:
Using the supplied power supply unit or the car
adapter
The battery is charged via the included power
supply unit or the R&S HA-Z202 car adapter (order
number 1309.6117.00) which is connected to the
jack on the right-hand side of the carrying handle.
If required, equip the power supply unit with the
country-specifi c plug. Remove the plug from the
power supply unit toward the front and fi rmly
connect the appropriate plug to the power supply
unit.
GalaxyE_v1-10_3.indd 35GalaxyE_v1-10_3.indd 35 08.04.2009 15:21:4108.04.2009 15:21:41

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the R&S FSH series and is the answer not in the manual?

R&S FSH series Specifications

General IconGeneral
Input Impedance50 Ω
Display640 x 480 pixels
Tracking generatorOptional
InterfacesUSB, LAN
Third Order Intercept (TOI)+15 dBm typical
Input VSWR≤1.5:1 (typical)
Input ConnectorN (f)
Power Supply100 V to 240 V
Frequency range9 kHz to 3.6/8/13.6/20 GHz
Battery lifeApprox. 4 hours (standard battery)

Related product manuals