R&S FSH series User Manual

37
E-02
Using the R&S HA-Z203 battery charger
1 External charger R&S HA-Z203
2 Lithium ion battery R&S HA-Z204 or HA-Z206
3 Power supply unit R&S HA-Z201 or
R&S HA-Z202 car adapter
For external charging, the lithium ion battery is
plugged into the R&S HA-Z203 external charger
(available as an accessory: order number
1309.6123.00) and supplied with current via the AC
power supply. The charging process is indicated by
the orange LED (CHARGE) on the charger. As soon
as the battery is fully charged, this LED goes off
and the green LED labeled READY begins to light
up. The auto power down mode is deactivated in
the default setting.
The R&S HA-Z203 external charger can
also be powered by the R&S HA-Z202 car
adapter.
GalaxyE_v1-10_3.indd 37GalaxyE_v1-10_3.indd 37 08.04.2009 15:21:4108.04.2009 15:21:41

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)