R&S MR4100E - Selecting the Notch Filter Speed

M3SR Series 4100 Selecting the Notch Filter Speed
3.156 Operating Manual 6175.4760.02 – 01
3.7.2.19 Selecting the Notch Filter Speed
Softkey Softkey Type Description
Listbox 1. Press 'Notch' softkey.
2. Select desired value from list, slowest to
fastest.
3. Press 'ENT' to confirm.
This radio uses a high-efficiency auto notch fil-
ter, automatically searching for disturbing car-
riers that can be notched to improve the
readability of a voice reception signal.
Within this list, the speed of notch following the
interferer can be selected. In the fastest set-
ting, some distortion of weak voice signals
might occur.
Notch Filter is only available in modulation
mode J3E.