Need help?Do you have a question about the R&S QPS201 and is the answer not in the manual?
Details safe practices for moving and installing the heavy R&S QPS unit.
Instructions for securing and covering cables to prevent hazards.
Specifies that the R&S QPS is for indoor use only and risks of water entry.
Safety measures for connecting the R&S QPS to the power supply.
Information on the weight of the calibration cylinder and the need for assistance.
Explains various safety symbols like potential hazard, electric hazard, and protective clothing.
Outlines compliance conditions for the R&S QPS in Canada.
Details compliance requirements and operating restrictions for the R&S QPS in the USA.
Details how to connect essential accessories like the touchscreen and resolution stations.
Instructions for establishing LAN and remote control power connections between the panels.
Steps to connect the operator touchscreen to the primary panel.
How to connect resolution station monitors to the primary or secondary panel.
Guidance on connecting optional accessories like metal detectors and traffic lights.
Methods for supplying power to resolution stations and other components.
Critical safety information regarding ground connections and voltage/frequency considerations.
Steps for connecting the power cord and turning on the system's main power switch.
Steps to boot the system, log in, and operate the scanner.
Explains how the R&S QPS enters and wakes from energy saving mode.
Procedures for safely shutting down the system via the touchscreen and power switch.
Methods for quickly disconnecting the R&S QPS from the power source in emergencies.
To Next Page
General
