Need help?Do you have a question about the R&S RTC1002 and is the answer not in the manual?
General| Type | Digital Oscilloscope |
|---|---|
| Channels | 2 |
| Vertical Resolution | 8 bit |
| Display Size | 10.1 inch |
| Trigger Types | Edge, Pulse, Video, Runt, Timeout |
| Interfaces | USB, LAN, HDMI |
| Input Impedance | 1 MΩ |
| Max Input Voltage | 400 V |
| Power Supply | 100 V to 240 V |
Rules to prevent electric shock, personal injury, or fire.
Information regarding certification for Class A electronic wave compatibility.
Details on available manuals, user manual, instrument help, and basic safety instructions.
Contains technical specifications, options, order numbers, and accessories.
Information on how to access the calibration certificate for the instrument.
Lists new features, improvements, known issues, and open source licenses.
Instructions for inspecting the package, unpacking, and checking instrument and accessories for damage or completeness.
Guidelines for placing the instrument on a benchtop or in a rack, including safety precautions for feet.
Procedures for powering on the R&S RTC1000, including AC voltage ranges and power consumption.
Steps to start the instrument, its warm-up time, and how to shut it down to standby mode.
Steps to properly power off the instrument and disconnect it from power supplies to avoid data loss.
Recommendations for suppressing electromagnetic interference to maintain measurement accuracy.
Information on the type of fuse used and its location for replacement.
Overview of the R&S RTC1000 front panel, detailing the display and functional blocks.
Description of BNC inputs for analog channels and external trigger, including maximum input voltages and impedance.
Details on connectors like Aux Out, Logic Channels, Pattern Generator, and Probe Comp. terminals.
Identifies connectors on the rear panel, including power, USB, and LAN interfaces.
To Next Page
