Do you have a question about the Rane SM26S and is the answer not in the manual?
Channels | 6 |
---|---|
Inputs | 6 XLR/TRS combo inputs |
Outputs | 2 XLR outputs, 2 TRS outputs |
S/N Ratio | > 100 dB |
Maximum Input Level | +22 dBu |
Maximum Output Level | +22 dBu |
Gain Control | Yes |
Type | Splitter/Mixer |
Frequency Response | 20 Hz to 20 kHz |
CMRR | >70dB at 1kHz |
Input Impedance | 10 kΩ |
EQ | No |
Phantom Power | No |
Dimensions | 1.75" H x 8.5" W x 6.5" D |
Sets the gain of the Left & Right Master Input stages, with a range of Off to +12 dB.
Controls the Level of signal through each particular channel.
Serves two functions: MIX for Splitter, PAN for Mixer.
Controls the gain of the output stages and signal amount at MIX OUTPUT jacks.
Indicates when the SM26S is ready to go.
Balanced TRS ¼" Master Inputs feeding MONO OUTs when MONO INs are not used.
TRS ¼" jacks accepting balanced or unbalanced mono signals.
TRS ¼" jacks delivering unbalanced or balanced outputs.
TRS ¼" jacks in parallel with MASTER INs for daisy-chaining units.
Balanced TRS ¼" outputs controlled by MASTER OUTPUT LEVEL.
IEC 60320 C6 appliance inlet for 100-240 VAC operation.
Signal routing options requiring removal of the top cover to move jumpers.
Information on servicing by the Rane factory or authorized service center.
Details Rane's warranty policy for products purchased within the USA.
Details Rane's warranty policy for products purchased outside the USA.
Instructions for shipping a Rane product to the factory for service.