TTM 56
PERFORMANCE MIXER
Data Sheet-1
Top View
DATA SHEET
Description
Rane takes performance mixer design as seriously as performing
DJs take their art form. In an effort to provide the best instru-
ment possible, Rane devoted two years of R&D to developing a
mixer with unparalleled performance. e TTM 56 is flexible,
durable, and feature packed. e audio quality of the TTM 56
qualifies it for use in the most demanding live venue, recording
studio or live broadcast applications.
Non-Contact Crossfader and Channel Faders
Rane’s patented magnetic fader is the fastest, most accurate,
and longest lasting on the planet. e design uses non-contact
magnetic position sensor technology previously reserved for the
most demanding aerospace and industrial applications. No travel
noise - No bleed - Ever! Unlike optical non-contact faders, the
magnetic fader is impervious to smoke, moisture, temperature
and aging. e electrical performance is totally unaffected by
use. e mechanical life of the magnetic fader exceeds 10 million
operations.
ese magnetic faders know exactly what your hand is doing!
A proprietary curve-translation module converts your hand mo-
tion into precise audio level control. e TTM 56 offers the user
more flexible curve selection and fader assignment options than
ever before. is technology is used for both Channel Faders and
the Crossfader.
e Crossfader control includes Reverse switch, Mode switch
and independent, continuously adjustable Contours for A-side
and B-side. In Mode 1, the Contour control adjusts from smooth
blend to extremely fast cut. Select Mode 2 for center-cut effect
(PGM 1 and PGM 2 off in the center) with full range Contour
control.
e Channel Fader controls include Reverse switches, Mode
switches and continuously adjustable Contours. In Mode 1, the
Contour control adjusts from smooth blend to extremely fast cut.
Select Mode 2 for Left/Right pan effect with Contour control.
e Channel Reverse switch allows left and right hand Channel
Faders to control Program 1 or Program 2.
Post-Fader FlexFx™
Rane’s proprietary FlexFx effects loop allows assigning post-fader
Program 1, post-fader Program 2 or both to the effects loop. A
Wet/Dry pan control gives the user total control of how much
processed signal is in the mix. With the effects loop post-fader,
reverb and other delay effects respond to both Channel Fader
and Crossfader operation.
Stereo Metering
e TTM 56 features two 10-segment meters with peak-hold.
A source switch allows users to select dual-mono Cue or stereo
Master operation. No need to stress over dropping a channel
without knowing.
Auxiliary Input and Output (Session Mix)
A stereo Aux Input with a Level control provides input for a
session mix, drum machine or other auxiliary input signal. e
stereo Aux Output with Level control provides output for session
mix, booth monitoring, recording or second zone.
3-Band Accelerated-Slope™ Full-Cut EQ
e TTM 56 provides 3-band, full cut tone controls for Program
1 and Program 2. EQ engage switches allow A/B comparison
and the ability to quickly cut or add EQ effect.
Front View
CONTOUR A CROSSFADER CONTOUR B HEADPHONES
MODEREVERSE
PWR
To Next Page
Need help?
General
