EasyManua.ls Logo

Range Road EcoPro300 - Identification

Range Road EcoPro300
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EcoPro
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 6
Component Identification
1. 2” Coupler: Attaches the firewood processor to your ATV or vehicle. Fits only 2” hitch balls.
2. Safety Chains: for attaching to tow vehicle along with 2” coupler.
3. Front Wheel: Used for moving on even stable ground & raising or lowering coupler height.
4. Leg: The leg helps support the firewood processor while operating. The leg should be pulled out of the
sleeve and reinserted from top down while towing (see Operation Instructions)
5. Engine: The air cooled engine powers the hydraulic pump.
6. Hydraulic Cylinder: The hydraulic cylinder has a 61cm (24”) stroke. It is rated to 3500 PSI
7. Gear Pump: The gear pump makes the hydraulic oil flow through the system. The EcoPro has a 2 section
pump with one live section dedicated to the saw/ram and one dedicated to the conveyor/accessories.
8. Hydraulic Filler Cap: Unscrew the cap to add hydraulic oil to the tank, oil should be midway up the
siteglass
9. Tires: Maximum rated speed is: 12” Wheels - 80Kph (50 Mph).
10. Log Deck: The log deck is angled to help keep the log against the deck wall without operator assistance.

Other manuals for Range Road EcoPro300

Related product manuals