34) On the RR5032A and the RR5036A Sawmills, the fuel tank mounts on top on the opposite side as the water
tank, The fuel tank frame bolts to the top of the sawmill with 4 bolts, the fuel tank itself does not bolt to the
frame, it sits on the mount using the weight of the fuel to hold it in. The rubber grommets should be put in the
tank holes, the 4 supplied bolts are not used.
35) Also on the 32A/36A Sawmill, the fuel line gets connected to the white filter on the side of the engine.
To Next Page
Loading...
