Assembly
Read all of the safety precautions and warnings in this manual before setting up or using this product.
TO PREVENT SERIOUS INJURY: The Saw Mill can be dangerous if assembled incorrectly.
If you do not feel completely comfortable assembling it, please have a qualified technician assemble it.
Note: For any additional information regarding the saw mill parts, refer to Assembly Diagram near the end of this
manual.
1) Open the package and carefully remove the Individual parts from the crate and organize on the floor. Leave
the large head unit resting in the crate.
2) The two long boxes at the bottom of the crate are the rail parts. Open these boxes and you will see a small white
box, open and take out the bolts and nuts for mounting the rails.
To Next Page
Loading...
