EasyManua.ls Logo

Range Rover L322 - Page 104

Range Rover L322
494 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DESCRIPTION AND OPERATION
RANGE ROVER 4.79
ABS ECU
The ABS ECU (C0506) provides a vehicle speed signal to the headlamp levelling ECU
(C1543) on a YW wire. This allows the headlamp levelling ECU to monitor the acceleration
of the vehicle and adjust the vertical position of the headlamps accordingly.
RH Front Height Sensor
The headlamp levelling ECU (C1543) provides a 5V reference feed to the RH front height
sensor (C1697) on a WB wire, and provides an earth path on a WN wire. The height sensor
(C1697) returns a signal feed back to the headlamp levelling ECU (C1543) on a WS wire.
By measuring this signal feed the headlamp ECU can determine the height of the front of
the vehicle, compare this to the signal supplied by the RH rear height sensor and adjust the
vertical position of the headlamps accordingly.
RH Rear Height Sensor
The headlamp levelling ECU (C1543) provides a 5V reference feed to the RH rear height
sensor (C1698) on an SB wire, and provides an earth path on an SN wire. The height sensor
(C1698) returns a signal feed back to the headlamp levelling ECU (C1543) on an SW wire.
By measuring this signal feed the headlamp ECU can determine the height of the rear of the
vehicle, compare this to the signal supplied by the RH front height sensor and adjust the
vertical position of the headlamps accordingly.