EasyManua.ls Logo

Range Rover L322 - Page 106

Range Rover L322
494 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DESCRIPTION AND OPERATION
RANGE ROVER 4.81
Rear Fog Lamps
Power Distribution
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and fuse 53 of
the passenger compartment fuse box (C0632) on an R wire. Fusible link 3 (C0589) provides
a constant battery feed to the LCM (C0937) on an R wire.
Fuse 53 (C0583) provides a constant battery feed to the ignition switch (C0099 on Td6
vehicles, C0028 on V8 vehicles) on an R wire. When the ignition switch is turned to the
'auxiliary' position, current flows across the switch (C0099 on Td6 vehicles, C0028 on V8
vehicles) to fuse 9 of the passenger compartment fuse box (C0585) on a PB wire. Fuse 9
(C0587) provides an auxiliary ignition feed to the LCM (C2040) on a PY wire. The LCM
(C2039) is earthed on an N wire.
Light Check Module
The Light Check Module (LCM) (C2040) provides a feed to the lighting switch (C0041) on a
YB wire. When rear fog lamps are selected, the switch contacts close momentarily. Current
flows across the switch to the LCM on an NB wire. Sensing this, the LCM powers the rear
fog lamps.
The LCM (C0937) provides a feed to the RH rear fog lamp (C0125) on a YB wire. The lamp
is earthed on an N wire. The LCM (C2039) also provides a feed to the LH rear fog lamp
(C0121) on a YB wire. The lamp is earthed on an N wire.