Rangecookers Select 90df - Installation Adjustments; Fitting Adjustable Feet; Levelling the Cooker

33
Fig. 9.2
FITTING THE ADJUSTABLE
FEET
The adjustable feet must be fitted to
the base of the cooker before use.
Rest the rear of the cooker on a
piece of the polystyrene packaging
exposing the base for the fitting of
the feet.
Fit the 4 legs by screwing them
tight into the support base as
shown in picture 9.3.
Fig. 9.3
LEVELLING THE COOKER
The cooker may be levelled by
screwing the lower ends of the feet
IN or OUT (fig. 9.4).
Fig. 9.4