To Next PageTo Next Page
Need help?Do you have a question about the Rangemaster 64000 series and is the answer not in the manual?
Reduce risk of fire, electric shock, or injury by observing general precautions.
Minimize injury risk during range top grease fires with specific safety instructions.
Notes on proper usage, maintenance, clearances, and airflow for safe operation.
Plan and install proper ductwork, elbows, and caps, sealing joints with tape.
Recommended hood installation clearances from electric and gas ranges for optimal performance.
Check included parts, identify sold separately items, and get ready for installation.
Instructions for installing an optional backsplash before the hood shell.
Guidance on choosing between interior and exterior blowers and following relevant steps.
Removing the knockout for the chosen opening for wiring and ducting.
Secure the rough-in plate and install the deviator for vertical openings.
Secure the adapter to the hood using screws and seal with duct tape.
Position the hood, mark screw locations, install screws, and secure the hood.
Connect the power cable to the wiring box using wire connectors, ensuring proper grounding.
Install the blower unit using screws, ensuring correct impeller orientation for dual blowers.
Install 50W halogen bulbs by rotating them clockwise into the sockets.
Install 120V, 175W max infrared bulbs or 120V, 90W halogen bulbs.
Install side filters first, then the center filter(s) by inserting and securing them.
Cleaning frequency and method for grease filters and impellers, noting they are dishwasher safe.
Instructions for cleaning stainless steel and enamel finishes, including recommended products and precautions.
Guidance on proper operation, including pre-cooking activation and post-cooking run time.
Operating the blower, halogen cooktop lights, and infrared warming lamps.
Explanation of the Heat Sentry™ feature that controls the blower based on heat.
Key specifications for lights, blower, CFM, and hood width.
Details of the one-year limited warranty, including coverage and exclusions for material defects.
Steps to qualify for warranty service, including necessary information and proof of purchase.
Wiring diagram specific to the 30" and 36" Rangemaster hood models.
Wiring diagram specific to the 42" and 48" Rangemaster hood models.
List of service parts for the 64000 Series hood, including quantities for different widths.
List of service parts for the single blower/rough-in configuration (Model P5).
List of service parts for the dual blower/rough-in configuration (Model P8).
Reduce risk of fire, electric shock, or injury by observing general precautions.
Minimize injury risk during range top grease fires with specific safety instructions.
Notes on proper usage, maintenance, clearances, and airflow for safe operation.
Plan and install proper ductwork, elbows, and caps, sealing joints with tape.
Recommended hood installation clearances from electric and gas ranges for optimal performance.
Check included parts, identify sold separately items, and get ready for installation.
Instructions for installing an optional backsplash before the hood shell.
Guidance on choosing between interior and exterior blowers and following relevant steps.
Removing the knockout for the chosen opening for wiring and ducting.
Secure the rough-in plate and install the deviator for vertical openings.
Secure the adapter to the hood using screws and seal with duct tape.
Position the hood, mark screw locations, install screws, and secure the hood.
Connect the power cable to the wiring box using wire connectors, ensuring proper grounding.
Install the blower unit using screws, ensuring correct impeller orientation for dual blowers.
Install 50W halogen bulbs by rotating them clockwise into the sockets.
Install 120V, 175W max infrared bulbs or 120V, 90W halogen bulbs.
Install side filters first, then the center filter(s) by inserting and securing them.
Cleaning frequency and method for grease filters and impellers, noting they are dishwasher safe.
Instructions for cleaning stainless steel and enamel finishes, including recommended products and precautions.
Guidance on proper operation, including pre-cooking activation and post-cooking run time.
Operating the blower, halogen cooktop lights, and infrared warming lamps.
Explanation of the Heat Sentry™ feature that controls the blower based on heat.
Key specifications for lights, blower, CFM, and hood width.
Details of the one-year limited warranty, including coverage and exclusions for material defects.
Steps to qualify for warranty service, including necessary information and proof of purchase.
Wiring diagram specific to the 30" and 36" Rangemaster hood models.
Wiring diagram specific to the 42" and 48" Rangemaster hood models.
List of service parts for the 64000 Series hood, including quantities for different widths.
List of service parts for the single blower/rough-in configuration (Model P5).
List of service parts for the dual blower/rough-in configuration (Model P8).
General| Width | 60 cm |
|---|---|
| Number of speeds | 3 |
| Number of bulbs | 2 |
| Number of Motors | 1 |
| Material | Stainless steel |
| Grease filter type | Aluminum |
