27
Electrical Supply Connection
Connect the appliance to the electrical supply (220-240V ~
50Hz) with the plug and lead, which are tted.
Connections to the mains supply should be in accordance
with local regulations.
n
DO NOT use plug adapter.
n
The appliance must be plugged into an earthed
socket.
n
Always make sure that the plug is accessible after
the appliance has been positioned.
If the electrical cable is damaged or worn, turn o the
refrigerator and consult an authorised agent for replacement.
n
The appliance is supplied with a standard 13 amp
3-pin mains plug tted with a 13-amp fuse. Should
the fuse require replacement, it must be replaced
with a fuse rated at 13 amp and approved to BS1362.
n
If the mains plug which is tted is unsuitable for
the socket outlet in your home or is removed for
any other reason, please contact an approved
electrician.
The mains lead of this appliance has been tted with a BS
1363A 13A fused plug. To change a fuse in this type of plug,
follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362
type, into the fuse cover.
3. Replace fuse cover.
Fig. 7.3
To Next Page
Loading...
