EasyManua.ls Logo

Rangemaster RG70 - Technical Specifications; Appliance Dimensions and Clearances; Gas and Electric Connection Details; Burner Power Ratings

Rangemaster RG70
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
8. Technical Data
The hob is an independent Class 3 built-in unit.
This hob is category II
2H3+
It is supplied set for group H natural gas. A conversion kit from NG to LP gas is packed with the hob.
INSTALLER: Please leave these instructions with the user.
DATA BADGE LOCATION: Base of the hob.
COUNTRY OF DESTINATION: GB/IE
Gas Electric
Natural Gas 20mbar 220 240V 50Hz
Butane 29mbar
Propane 37mbar
(See appliance data badge for test pressures)
Dimensions
Overall height
100mm;
120mm including gas connector
Above worktop 50mm;
Below worktop 50mm
Overall width
720mm; see Positioning of Cooker
Overall depth
510mm
Space for fixing
See ‘Positioning of Cooker
Minimum space above hotplate
650mm
Connections
Gas Electric
Rp ½ at rear right-hand side 220 240V 50Hz
Ratings
Natural Gas L.P. Gas
Hotplate
Injector Injector
Triple ring burner 3.5kW 141 3.5kW (255g/h) 94
Large Burners 3.0kW 129 3.0kW (218g/h) 87
Medium Burners 1.75kW 101 1.75kW (124g/h) 66
Small Burner 1.0kW 77 1.0kW (73g/h) 50
Gas burner inputs based on Gross Calorific Value
Maximum total electric load at 230V: 0.6W

Related product manuals