Do you have a question about the Ranger Communications RCI-2950DX and is the answer not in the manual?
Brand | Ranger Communications |
---|---|
Model | RCI-2950DX |
Category | Transceiver |
Language | English |
Details general specifications for the transceiver model, including frequency range, tuning steps, and emission types.
Outlines transmitter power output, modes, antenna connector, and modulation specifications.
Details receiver sensitivity, image rejection ratio, AGC figure of merit, and audio output.
Instructions for unpacking the transceiver and verifying all included items are present.
Guidance on securely mounting the transceiver in a suitable location.
Instructions for connecting the transceiver to a 12-13.8 VDC power source.
Explains how to use the frequency selector and adjust RF output power.
Describes the function of the microphone gain and volume controls for audio adjustment.
Details controls for receiver noise suppression, front-end gain, and receive frequency tuning.
Explains mode selection, noise blanker effectiveness, and ANL function.
Covers the Roger Beep feature and the Split function for repeater operation.
Details the PROGRAM, MANUAL, and SHIFT buttons for frequency adjustment.
Explains the DIM button for display brightness and the SWR button for checking SWR.
Describes the SCAN, MEMORY, and ENTER buttons for programming and scanning.
Explains the LOCK function to disable controls and UP/DOWN buttons for frequency adjustment.
Details all rear panel connectors for antenna, accessories, and power input.
Explains the Push-To-Talk switch and remote UP/DOWN controls on the microphone.
Details three methods for selecting operating frequencies using panel controls or microphone.
Covers programming for receive scanning and setting up split frequencies for repeaters.
Explains how to store and manage frequencies in the radio's memory locations.
Describes scanning programmed memory channels and using the S/RF and SWR meters.
Guide to programming upper and lower limits for full band frequency scanning.
Instructions on how to initiate and control scanning of programmed memory channels.
Details on programming transmit frequency offsets for repeater operations.
Information on the warranty period, coverage, and return authorization for radio products.