Need help?Do you have a question about the Ranger Communications RCI-2970N4 and is the answer not in the manual?
General| Brand | Ranger Communications |
|---|---|
| Model | RCI-2970N4 |
| Category | Transceiver |
| Language | English |
Lists items included in the transceiver package.
Guidance on selecting a suitable location for mounting the transceiver.
Instructions for connecting the transceiver to a power source.
Detailed description of the transceiver's front panel controls.
Adjustment of receiver background noise and signal strength.
Fine-tuning receive frequency and selecting operating modes.
Features for noise reduction and transmission indication.
Enables splitting transmit and receive frequencies for repeater use.
Storing and recalling frequencies, and manual mode.
Enabling frequency scanning and locking controls.
Description of rear panel jacks for antenna, CW, speaker, and power.
Details the PTT switch and remote UP/DOWN controls.
Explains three methods for selecting operating frequencies.
Selecting operating modes and adjusting transmitter output power.
Locating active frequencies by scanning the band.
Splitting transmit and receive frequencies for repeater use.
Storing and retrieving frequently used frequencies in memory.
Explains the LCD display bars for S/RF and SWR indication.
Scanning all frequencies between preset upper and lower limits.
Outlines the terms and conditions of the product's limited warranty.
To Next Page
