Ranger BN058 - Battery and SD Card Installation

- 8 -
5. Ba t t e r y a n d Sd ca r d In S t a l l a t I o n
NOTE: Make sure camera is OFF whenever installing
or removing batteries.
Use8xAAAlkalinebatteries.•
▲ Whenreplacingbatteriespleasemakesurethe
batteryvoltageandpolarity(+/-)arecorrect.
Incorrectvoltageorpolaritywilldamagethe
camera.
Me M o r y
Theexpandablemediacardslotiscapableof
acceptingSDcardswithcapacityupto32GB(sold
separately).
In S e r t I n g Sd c a r d
NOTE: Make sure camera is OFF whenever installing
or removing the memory card.
InserttheSDmemorycardintotheSDcardslot•
withthecoppercontactsfacingupasshownon
thestickerlocatedatthesideofthehousing.
ToremovetheSDmemorycard,depressitsoit•
popsoutandpullgently.
▲ SDcardsmustbecleanandcontainnodata
orimagesfromothersources.Ifyouareusing
theSDcardfromotherdevices,pleasemake
sureyouformattheSDcardpriortouseinthe
camera.Newcardsmaybeusedstraightfrom
thepackage.