EasyManua.ls Logo

Ranger DST-2420 User Manual

Ranger DST-2420
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MODEL
DST-2420
WHEEL BALANCER
INSTALLATION AND OPERATION MANUAL
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the
purchaser upon receipt from the carrier. Consequently,
claims for the material damaged in shipment must be
made by the purchaser against the transportation
company at the time shipment is received.
BE SAFE
Your new Ranger balancer was designed and built
with safety in mind. However, your overall safety
can be increased by proper training and thoughtful
operation on the part of the operator.
DO NOT operate or repair this equipment without
reading this manual and the important safety
instructions shown inside.
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Toll Free 1-800-253-2363
Tel: 1-805-933-9970
Fax: 1-805-933-9160
www.rangerproducts.com
FOR BALANCING
AUTOMOBILE,
MOTORCYCLE
& LIGHT TRUCK
TIRES / WHEELS
Keep this operation manual near the
machine at all times. Make sure that
ALL USERS read this manual.
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR
TO INSTALLATION AND OPERATION. BY PROCEEDING YOU
AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND
THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS
MANUAL TO ALL OPERATORS. FAILURE TO OPERATE THIS
EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
REV A 06-21-10
p/n# 5900233
Question and Answer IconNeed help?

Do you have a question about the Ranger DST-2420 and is the answer not in the manual?

Ranger DST-2420 Specifications

General IconGeneral
BrandRanger
ModelDST-2420
CategoryWheel Balancers
LanguageEnglish

Summary

READ FIRST

Safety Precautions Overview

Essential safety warnings and mandatory reading before operation.

IMPORTANT SAFETY INSTRUCTIONS

General Safety Guidelines

Key instructions to follow before and during unit operation.

INSTALLATION AND SETUP

BALANCER OVERVIEW

MOUNTING WHEELS

BALANCING INSTRUCTIONS

Inputting Wheel Data

Process for entering wheel dimensions and offset for balancing.

TROUBLESHOOTING VIBRATION ISSUES

Identifying Causes of Vibration

Common reasons for vehicle vibration after balancing.

TROUBLESHOOTING GUIDE

Installation, Assembly, and Calibration Checks

Verifying setup and performing calibration procedures.

CALIBRATION PROCEDURES

Weight Location Verification

Step-by-step guide for verifying weight placement accuracy.

TROUBLESHOOTING ERROR CODES

Error Codes, Failed Calibration, and Display Issues

Explains error codes, calibration failures, and display problems.

Related product manuals