To Next PageTo Next Page
Need help?Do you have a question about the Ranger DST30P and is the answer not in the manual?
General| Brand | Ranger |
|---|---|
| Model | DST30P |
| Category | Wheel Balancers |
| Language | English |
Mandatory safety practices including PPE, operational hazards, and maintenance.
List and description of essential accessories that come with the wheel balancer.
Definitions of essential terms related to wheel balancing and components.
Essential safety rules to follow during the installation process.
Guidelines for planning and executing the electrical connections for the balancer.
List of tools recommended or required for installing the wheel balancer.
Required space and clearance around the balancer for safe operation.
Important precautions and safety guidelines to follow during balancer operation.
Description of the Inner and Outer Windows for data entry and weight display.
Explanation of indicators used to guide weight placement.
Indicators that display the active balancing mode.
Functions of buttons for starting, stopping, mode selection, and measurements.
How to measure and input the distance from balancer to inner wheel edge.
How to measure and input the wheel width from inner to outer edge.
How to measure and input the wheel diameter from outer edge to outer edge.
Procedure for front-cone mounting, the preferred method for accurate balancing.
Procedure for rear-cone mounting when front-cone is not suitable.
Procedure for dual-cone mounting, used for specific aftermarket wheels.
Procedure for STA1 balancing where weight goes on the center plane.
Procedure for STA2 balancing where weight goes on the inner edge.
Procedure for ALU1 balancing, weight on inner edge and/or center plane.
Procedure for ALU2 balancing, weight on inner plane and/or center plane.
