DST30P Wheel Balancer 5 P/N 5900163 — Rev. C1 — March 2020
• Make a visual inspection of the product
before using it each time
. Do not use the product if
you find any missing or damaged parts. Instead, take the unit out of service, then contact an
authorized repair facility, your distributor, or Ranger Products at (805) 933-9970.
• BendPak Ranger recommends making a
thorough
inspection of the product once a month.
Replace any damaged or severely worn parts, decals, or warning labels.
Symbols
Following are the symbols that may be used in this manual:
⚠ DANGER Calls attention to a hazard that will result in death or injury.
⚠ WARNING Calls attention to a hazard or unsafe practice that could result in death or injury.
⚠ CAUTION Calls attention to a hazard or unsafe practice that could result in personal injury,
product damage, or property damage.
NOTICE Calls attention to a situation that, if not avoided, could result in product or property
damage.
Tip Calls attention to information that can help you use your unit better.
Liability Information
BendPak Ranger assumes no liability for damages resulting from:
• Use of the equipment for purposes other than those described in this manual.
• Modifications to the equipment without prior, written permission from BendPak Ranger.
• Injury or death caused by modifying, disabling, overriding, or removing safety features.
• Damage to the equipment from external influences.
• Incorrect operation of the equipment.
To Next Page
Loading...
