Ranger RCI-2970N4 User Manual

Details product's general technical specifications including model, frequency range, and emission types.

Outlines transmitter capabilities, power output, modes, and antenna connector type.

Details receiver sensitivity, image rejection, AGC, and audio power output.

Lists all included items and advises on checking for damage or missing parts.

Provides guidance on selecting a location and attaching the transceiver for optimal air circulation.

Explains how to connect the transceiver to a 12-13.8 VDC power source, cautioning voltage drops.

Identifies and explains the primary controls located on the front panel of the transceiver.

Explains the function of Squelch, RF Gain, Clarifier, Mode, NB/ANL, and Roger Beep controls.

Details controls like Split, PRG, MAN, SHF, DIM, SWR, SCAN, MEM, ENT, LOCK, and UP/DOWN.

Describes rear panel connectors and the microphone's PTT, UP/DOWN, and wiring.

Covers methods for frequency selection and adjustments for mode and RF power.

Guides on programming receive scanning limits for locating active frequencies.

Explains how to program split frequencies for repeater operation.

Details how to program and store frequencies in the transceiver's memory.

Covers the S/RF and SWR meter functions and clearing memory channels.

Instructions for setting upper/lower limits and initiating all-frequency scanning.

Details on scanning programmed memory locations.

Guides on programming a 1 MHz offset for transmitter frequency relative to receive frequency.

Outlines the terms and conditions of the Ranger Communications Limited Warranty.