7
INTRODUCTION
This tool is intended for tacking of fabric, leather, cardboard, paper and
similar materials on surfaces of softwood or materials similar to wood.
The tacker should be used only for the intended purposes. This tool is
for private use only.
TECHNICAL SPECIFICATIONS
Battery Tacker, model number BTX10
Staple type Rapid 53
Staple length 4-10 mm
Magazine capacity staple, max 100 pcs
Tool Dimensions H x W x L 156 x 58 x 170 mm
Weight 0.774 kg
Battery type, Voltage Li-Ion, 3.6 V
Battery capacity 1300 mAh
Battery charger
External USB charger 5VDC
max 3.0 A
Charging time 100 minutes
Shots per charge, max ≈ 900 shots
Stapling speed, max continuous 20 shots/minute
TOOL ELEMENTS
🅐 LED 🅑 Micro-USB port
🅒 Integrated battery pack 🅓 Trigger
🅔 Magazine latch 🅕 Magazine
🅖 Staple indicator 🅗 Safety yoke
🅘 Micro-USB cable
GENERAL POWER TOOL
SAFETY WARNINGS
BTX10 Battery tacker
Original instructions
To Next Page
Loading...
