To Next PageTo Next Page
Need help?Do you have a question about the Rapid E100 and is the answer not in the manual?
General| Pinning | - |
|---|---|
| Product type | Nailer/staple gun |
| Product color | Black, Blue, White, Yellow |
| Housing material | Metal, Plastic |
| Permanent stapling | Yes |
| Shot speed | 20 shots/min |
| Nail length (max) | 15 mm |
| Staple length (max) | 14 mm |
| Staple length (min) | 6 mm |
| Power source | AC |
Weight and Dimensions| Depth | 310 mm |
|---|---|
| Width | 155 mm |
| Height | 180 mm |
| Weight | 1000 g |
Maintain a clean, well-lit workspace and avoid explosive atmospheres.
Ensure proper plug matching, avoid wet conditions, and protect the power cord.
Stay alert, use personal protective equipment, and prevent unintentional starting.
Use the correct tool, ensure controls function, disconnect power before adjustments, and store properly.
Handle with care, avoid accidental firing, use on workpiece, and do not use for electrical cables.
Specifies sound pressure and sound power levels with associated uncertainty.
Details declared vibration values and measurement context for comparison.
Identifies key components of the tacker as shown in Figure 1.
Step-by-step guide for loading fasteners into the tacker's magazine.
Instructions for safely unloading fasteners from the magazine.
Procedure for connecting, powering on, and firing the tacker.
Recommendations for extension cord wire gauge based on length.
Guidelines for servicing the power tool by qualified personnel with identical parts.
