charged.
Phone has been preset to Standard SMARTPHONE IV Operation.
The following steps can be done in any order.
Simplified Programming Instructions
1. Programming Telephone
a. Press START
b. Press SET (key in telephone number)
c. Press M1
d. Press SET (key in telephone number)
e. Press M2
f. Press and hold STOP for 2.5 seconds
2.
Programming Call Tracker
a. Press START
b. Press START
c. Speak message – 18 seconds
d. Press STOP
e. Press PAUSE to review message
f. Press and hold STOP for 2.5 seconds
3.
Programming Timer
a. Press START
b. Press SET, SET
c. Enter the number of minutes you wish to talk
d. Press SET
e. Press and hold STOP for 2.5 seconds
4.
Change Telephone Security Code
a. Press START
b. Press SET, SET, SET
c. Press 2
d. Press 4 digit ID Code (your decision) Note this on label.
Cannot be 0000.
e. Press STOP
f. Press and hold STOP for 2.5 seconds
5.
Ring – Down Telephone Line Programming
a. Press START
b. Press SET, PAUSE, M1
c. Press SET, M2
d. Press SET, SET, SET
e. Press 3
f. Press 0
g. Press STOP
h. Press and hold STOP for 2.5 seconds
6.
Programming Consolidator Telephone ID Numbers
a. Press START
b. Press SET, SET, SET
c. Press 1
d. Key in the number for the elevator (i.e. 1-5)
e. Press STOP
f. Press and hold STOP for 2.5 seconds
7.
Consolidator Operation
Dial the SMARTPHONE IV, all phones will automatically
answer active.
1. Select Individual Phone
Press * 1 (Phone 1) Press # 1 (Phone 6)
Press * 2 (Phone 2) Press # 2 (Phone 7)
Press * 3 (Phone 3) Press # 3 (Phone 8)
Press * 4 (Phone 4) Press # 4 (Phone 9)
Press * 5 (Phone 5) Press # 5 (Phone 10)
2. Select All Phones Press * 0
(2-way conversation with all units)
3. Select All Phones (page mode) Press * 9
(Listen mode only, in elevator)
Basic Programming 1 – 3. Advanced Programming 4 – 7.
SMARTPHONE IV
continued
We're There for You!
TOLL FREE TECHNICAL SUPPORT 1-800-451-1460 EXT. 3