4. Press button definition
GD06 uses independent press button, in total three buttons:
5.Operation instructions
1) Power ON/OFF
When the power is off, Long press
（
MODE
）
during
3seconds, screen will display all contents and start to normal
working mode, and controller will be turned on When the
power is on, Long press
（
MODE
）
during 3 seconds,screen
will be powered off, and controller will be turned off. If no
any operation both on bike and display during
10minutes(time could be set), the display will turn off
automatically, in this case, no power consumption for both
display and controller.
2) ODO/TRIP
Long press (UP )and (MODE) switch different speed
information,Real time speed（ SPEED）→ Max speed（ MAX
SPEED）→Average speed（ AVGSPEED）
3)ODO/TRIP/ Driving Time/Error Code
Short press(MODE) to switch ODO/TRIP/ Driving Time/Error
Code Trip(Single trip distance)→ODO(Accumulated distance)
→TM(Driving Time)→REE(Error Code).
To Next Page
Loading...
