4)Assist level
Short press (UP)or (DOWN) to change assist
level,default value is level 1
5) Head light control
Long press(UP) for 3 seconds turn on/off the head
light.
6) 6km mode
When the bike is stopped, long press(DOWN) , will
enter 6km/h mode, the speed will be 4.5~7.5km/h
according to different road conditions,
“WALK” will show up on screen, long press again or
short press ,will quit 6km/h mode. Long press or
short press could be customized by clients.
1.When the display is powered on,long press(UP)
and(DOWN) ,will enter parameter setting mode,in
this mode, can change parameter values, long
press again and will quit parameter setting mode
or no operation during 10s will also quit this
mode.
2.n parameter setting mode,short press(UP) /
(DOWN) will change parameter value,short
press(MODE) will save current value and switch
to next parameter.
1) P01-back light lightness
：
short press(UP) / (DOWN)will switch from 1 to
3,Level 3 is lightest. Level 2 is default value.
To Next Page
Loading...
