Poor connection
well connection
You could adjust the battery track by unscrewing the screws on the
bottom to better connect the battery and the bike.
Make sure the brake rotor is in the middle of two brake pads.
Adjust the brake tension according toyour riding habits.
Loosen the screw and adjust the brake wire to the suitable brake
tightness. Loosen the screwsto adjust the (abnormal
noise or brake stuck when braking).
Adjust the brake pad to keep the rotor in the middle position.
Tighten the screws after each adjustment.
• Brake
①
②
③
① Adjust brake rotor
③ Adjust brake rotor
② Adjust the brake
To Next Page
Loading...
