• Check
PREPARING TO RIDE
Make sure all components are tightened. Adjust the height of
the handlebar and the seat post. DO NOT raise it above the
safety line.
Make sure the brakes can cut off the power supply to the motor,
and whether it is sensitive and reliable.
Make sure the front and rear axle nuts are
tightened.
Make sure the display, brakes and lights can work properly.
Make sure the chain is tight.
Make sure the pedals and all the connectio parts are firm and
would not loose, and
whether the crank is flexible without jamming.
Make sure the front and rear tire pressure and tire wear are
suitable for your journey ahead.
Make sure the throttle works well without
jamming, and whether it feels tight or loose when pressing the
throttle.
Make sure the battery has been locked.
To Next Page
Loading...
