• Parameter setting
1.When the display is powered on,long press and ,will
enter parameter setting mode,in this mode, can change parameter
values, long press again and will quit parameter setting mode or
no operation during 10s will also quit this mode.
2.In parameter setting mode, short press / will change
parameter value,short press will save current value and switch
to next parameter.
( 2 ) P02-kmh/MPH ：
Short press / to Switch kmh/MPH.
( 3 ) P03-Working voltage ：
short press / to switch 24V,36V,48V.
( 4 ) P04-Auto shutdown time:
short press / to switch from 0 to 60, it is the time(in
minutes) to shut down the screen automatically if no operation 0
means never shut down, Default value is 10 minutes
⑤Head light control
Long press for 3 seconds turn on/off the head light。
⑥ 6km mode
When the bike is stopped, long press and , will enter
6km/h mode, the speed will be 4.5~7.5km/h according to different
road conditions, “WALK” will show up on screen, long press
again or short press ,will quit 6km/h mode. Long press or short
press could be customized by clients.
( 1 ) P01-back light lightness ：
short press / will switch from 1 to 3, Level 3 is lightest.
Level 2 is default value.
To Next Page
Loading...
