Press and hold the button constantly till the
display is on / off.
Increase/Decrease
the PAS Level
Press "+" or "-" button to increase or decrease
the PAS Level.
Switch different
display surface
Press " i " button to switch different display
surface, including"Trip (single trip mileage) ",
"ODO(total mileage)", "MAX(maximum speed)",
"AVG(average speed)" and "Time (total riding
time)".
Press "i" constantly till the mode changes on
the display, there are three modes: ECO, Normal
and Sport. The acceleration of ECO mode is
small while the Sport mode`s is big. ECO mode
will consume the power of the battery least
while Sport mode will consume it most.
Turn on/off the
headlight manually
Access the display
setting
Press the "+" and "-" buttons constantly for 3
seconds, then "+" stands for last one, "-" stands
for next one, "i" stands for confirm.
Press "-" button constantly till the motor
engages, then the bike will go with a constant
speed of 3 mph.
*The walking mode will stop as soon as the "-"
button is not being press constantly.