Need help?Do you have a question about the Rattler 250 and is the answer not in the manual?
Details routine care and upkeep for the vehicle security system.
Outlines the terms, conditions, and coverage period for the product's warranty.
Provides compliance information regarding FCC rules for device operation.
Explains functions of buttons I, II, and I+II in the standard remote configuration.
Instructions on how to activate the security system and its features.
Procedures for deactivating the security system remotely or manually.
Manual method to disarm the system when the remote is unavailable.
How to trigger the system to attract attention in emergencies.
Option to disable audible confirmation chirps for arming/disarming.
How to temporarily disable arming functions for service or washing.
Using the remote transmitter to enter or exit Valet Mode.
Explains system feedback during arming, including bypass notifications.
Interprets chirps upon disarming to identify past system triggers or tamper alerts.
Correlates LED flashes to specific sensor inputs and system triggers.
Detects glass breakage and impact sounds for enhanced security.
Maintains system operation and alarm if vehicle battery is disconnected.
Creates an invisible detection field to alert on intrusions.
Allows remote operation of the vehicle's trunk or hatch.
Automates power window operation for convenience and security.
Enables remote starting, engine monitoring, and climate control activation.
The central unit housing the microprocessor that controls system functions.
Prevents the vehicle starter from cranking when the system is armed.
Any physical connection to the system, such as sensors or switches.
Indicator light showing system status and reporting triggers/faults.
Detects impacts to the vehicle, triggering system responses.
Emits audible alerts, chirps, and tones when the system is triggered.
Hand-held remote control for operating system functions.
Alarm activation event, characterized by siren and flashing lights.
Manual override switch for alarm functions or entering Valet Mode.
Initial alert for light impacts, using siren chirps and flashing lights.
A unique input recognized by the alarm system, often shared by multiple sensors.
Step-by-step guide to arming the system using the remote transmitter.
Instructions for disarming the system using the remote transmitter.
Method to disarm the system manually using the ignition and Valet switch.
How to temporarily disable confirmation chirps for single arm/disarm operations.
Procedure to activate the panic alarm for emergency situations.
Manual method for engaging or disengaging Valet Mode.
Using the remote transmitter to control Valet Mode.
To Next Page
General