Rattler 300 - User Manual

Model 300
Installation Guide
© 2000 Directed Electronics, Inc. Vista, CA N431R 3-00

Summary

primary harness (H1), 12-pin connector

relay harness (H2), 6-pin connector

starter kill harness (H3), 2-pin connector

primary harness (H1) wire connection guide

relay harness (H2) wire connection guide

type A: positive-triggered, relay-driven system

type B: negative-triggered, relay-driven system

testing reversing polarity systems

type C: reversing polarity system

type D: adding one or more after-market actuators

type E: electrically-activated vacuum

type F: one-wire system (cut to lock, ground to unlock)

type G: positive (+) multiplex

type H: negative (-) multiplex

starter kill harness (H3) wire connection guide

transmitter;receiver learn routine

transmitter configuration

operating settings learn routine

troubleshooting

Rattler 300 Specifications